Kia Optima Manuals

Kia Forte: Seat Heater (Air Ventilation) Inspection - Seat Electrical - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Seat Heater (Air Ventilation) Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Seat Electrical / Seat Heater (Air Ventilation) Inspection

Front Seat Heater (Driver)
1.
Check for continuity and measure the resistance between terminals.

No.
 Description
 No.
 Description
1
 -
 6
 NTC +
2
 Ground
 7
 Power
3
 Heater cushion
 8
 NTC -
4
 Heater back
 9
 Back blower
5
 -
 10
 Cushion blower

Standard value (Fabric/ Leather)
Cushion : 5.86Ω ± 10%
Back : 4.19Ω ± 10%
Set : 10.05Ω ± 10%
2.
Operate the seat heater after connecting the connector, and then check the NTC by measuring the temperature of seat surface.

 1st
 2nd
 3rd
Cushion
(±2°C)
 36°C
 39°C
 42°C
Back
(±2°C)
 40°C
 45°C
 50°C

Seat Heater (Air Ventilation) Circuit Diagram
...

Seat Heater (Non-Air Ventilation) Component Location
...

See also:

Relay Box (Passenger Compartment) Installation
1. Install the smart junction box. 2. Install the crash pad lower panel. 3. Check that all system operates norm ...

[CVVT System Mode]
(1) Low Speed / Low Load (2) Part Load (3) Low Speed / High Load (4) High Speed / High Load ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least thirty seconds bef ...

Categories


Copyright © www.kifomanual.com 2014-2025