Kia Forte: Power Outside Mirror Switch Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Power Door Mirrors / Power Outside Mirror Switch Installation
| 1. |
Install the driver power window switch and connectors.
|
| 2. |
Install the front door trim.
|
Power Outside Mirror Switch Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
...
Power Door Mirror Actuator Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door quadrant inner cover (A).
3.
D ...
See also:
Inspection
If any of the following conditions occur, WCS reset and accuracy check
should be performed.
•
The WCS ECU or any of the sensors is replaced.
•
...
Telemetics Unit (TMU) Component
Connector Pin Specification
No.
Pin Name
Type
From
To
Description (Wiring
Spec.)
1
GND
DC Ground
TMU
Batt ...
Front Fog Lamps Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
...
Copyright © www.kifomanual.com 2014-2025