1. |
The SJB can be diagnosed by using the GDS. The SJB communicates
with the GDS which then displays inputs and outputs along with codes.
|
2. |
To diagnose the SJB function, select the vehicle model, BCM and
SJB.
|
3. |
To consult the present input/out value of SJB, "Current DATA".
It provides information of SJB input/output conditions.
|
4. |
To perform functional test on SJB outputs, select "Actuation Test"
|
Mode Control Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode con ...
Heater & A/C Control Unit (DATC) Replacement
1.
Remove the audio unit.
(Refer to Body Electrical System - "Audio Unit")
2.
After loosening the mounting screws, remove the ...
Rear Door Belt Inside Weatherstrip Replacement
(4Door, 5Door)
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door bel ...