1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer Body - "Crash Pad Lower Panel")
|
3. |
Disconnect the connectors from the fuse side of the smart junction
box.
|
4. |
Remove the smart junction box after loosening the mounting nuts
(2EA) and bolt.
|
5. |
Disconnect the connectors from the back side of the smart junction
box.
|
Front Door Side Weatherstrip Replacement
(4Door, 5Door)
1.
Loosen the front door checker (B) mounting bolt.
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ...
Auto Defogging Sensor Description
The auto defogging sensor is installed on the front windshield glass.
The auto defogging sensorr senses moisture on the windshild. The air conditioner
control module receives the signal from ...
DC/DC Converter Installation
1.
Install in the reverse order of removal.
If the battery negative (-) c ...