Kia Forte: Output Speed Sensor Signal Waveform

Fig 1) Input/Output speed sensor at low speed

Fig 2) Input/Output speed sensor at high speed

Output Speed Sensor Circuit Diagram

...

Output Speed Sensor Inspection

1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

See also:

Starter Installation
1. Install in the reverse order of removal. Starter installation bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...

Brake Pedal
Components 1. Cowl bracket 2. Brake pedal member assembly 3. Stop lamp switch 4. Return spring 5. Brake pedal 6. Bolt ...

Engine Control Module (ECM) Installation
   When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. ...