Kia Forte: Manifold Absolute Pressure Sensor (MAPS) Specification
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Specification
| Pressure [kPa (kgf/cm², psi)] |
Output Voltage (V) |
| 20.0 (0.20, 2.9) |
0.79 |
| 46.7 (0.47, 6.77) |
1.84 |
| 101.3 (1.03, 14.7) |
4.0 |
Manifold Absolute Pressure Sensor (MAPS) Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor
and is installed on the surge tank. It senses absolute pressure of the surge
tank and transfers the analog signal propo ...
Manifold Absolute Pressure Sensor (MAPS) Circuit Diagram
(M/T)
(A/T)
...
See also:
IMS Control Switch Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
Center Fascia Panel Replacement
•
Put on gloves to protect your hands.
&n ...
Alternator On-vehicle Inpection
•
Check that the battery cables are connected to the correct
terminals.
...
Copyright © www.kifomanual.com 2014-2025