Kia Forte: Automatic Transaxle System

Control Shaft Complete Installation

1. Install in the reverse order of removal.    • ...

Specifications

Item Specifications Transaxle type A6GF1 Engine model Gasoline 1.8 MPI Torque converter type 3-element, 1-stage, 2-phase type ...

See also:

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

PTC Heater Inspection
Operating Logic Test (Manual only) Inspect the PTC operation with the confirmation logic below : 1. Entering (1) Set the Floor mode ...

IMS Control Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the seat side cover (A). 3. Disconnect the p ...