Kia Forte: Power Door Lock Switch Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch Removal
Driver Door Lock Switch
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
| 3. |
Disconnect the power window switch module connectors (A) from
the door trim.
|
| 4. |
Remove the power window switch (A) after loosening 4 screws.
|
Passenger Door Lock Switch
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim")
|
| 3. |
Disconnect the power window switch module connector from the door
trim.
|
| 4. |
Remove the power window switch (A) after loosening the mounting
screws.
|
Power Door Lock Switch Inspection
Driver Door Lock Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front ...
Power Door Lock Switch Installation
1.
Install the power window switch.
2.
Connect the connector and install the front door trim.
...
See also:
Control System Composition
Fault Diagnosis
Features a fail-safe mechanism that provides "limp-home" 4th gear hold
to enable the vehicle to be driven to the owner's home or dealer shop.
Fail-Safe: ...
Spark Plug Removal
1.
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug wrench, remove the spark plu ...
Alternator On-vehicle Inpection
•
Check that the battery cables are connected to the correct
terminals.
...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright www.kifomanual.com 2014-2026