Kia Forte: Description
The ECM (Electro Chromatic inside rear view Mirror) is for dimming the
reflecting light from a vehicle behind at night, Preventing glare from the light.
The forward facing sensor detects brightness of the surroundings, while the
rearward looking sensor detects the strength of the reflecting light and adjusts
the reflexibility of the mirror in the range of 7~85%. But, when the reverse
gear is engaged, it stops functioning.
| 1. |
The forward facing sensor sees if the brightness of the surroundings
is low enough for the mirror to operate its function.
|
| 2. |
The rearward looking sensor detects glaring of the reflecting
light from a vehicle behind.
|
| 3. |
The ECM is darkened to the level as determined by the rearward
looking sensor. When the glaring is no longer detected, the mirror stops
functioning.
1. LED indicator
2. ON/OFF Switch
3. Rearward looking sensor
4. Forward looking sensor
|
Components
...
Automatic-dimming Function
To protect your vision during nighttime driving, your mirror will automatically
dim upon detecting glare from the vehicles traveling behind you. The auto-dimming
function can be controlled by ...
See also:
Variable Charge Motion Actuator (VCMA) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the VCMA connector (A).
...
Starter Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...
Room lamp
To turn the room lamp ON or OFF, push the switch.
If your vehicle is not equipped with a map lamp, the room lamp will also turn
on or off as follows.
The room lamp comes on when a door is opene ...
Copyright © www.kifomanual.com 2014-2025