Kia Forte: Inspection
Check it by the procedure below to see if the function of the ECM is normal.
| 1. |
Turn the ignition key to the "ON" position.
|
| 2. |
Cover the front sensor to stop functioning.
|
| 3. |
Shine a light at the rear sensor.
|
| 4. |
The ECM should be darkened as soon as the rear sensor detects
the light.
|
| 5. |
When the reverse gear is engaged, the ECM should not be darkened.
|
| 6. |
When heading lights to both the front and rear sensors, the ECM
should not be darkened.
|
Automatic-dimming Function
To protect your vision during nighttime driving, your mirror will automatically
dim upon detecting glare from the vehicles traveling behind you. The auto-dimming
function can be controlled by ...
Removal
1.
Remove the mirror wiring cover (A).
2.
Disconnect the mirror connector (B).
3.
Loosen the mirror mou ...
See also:
Description
EPS (Electronic power steering, Column assist type) system uses an electric
motor to assist the steering force and it is an engine operation independent
steering system.
EPS control modu ...
Installation
1.
Install in the reverse order of removal.
2.
Adjust the clutch switch.
(1)
Adjust the gab by rotating t ...
Auto Light Sensor Inspection
In the state of IGN1 ON, when multifunction switch module detects auto
light switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor' ...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright www.kifomanual.com 2014-2026