Kia Forte: Front Fog Lamps Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Front Fog Lamps Inspection
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the lighting switch of the multi-function switch.
(Refer to Multifunction Switch)
|
| 3. |
With the front fog lamp switch, make sure that continuity exists
between the terminals below.
If continuity is not as specified, replace the multi-function
switch.
Front Fog Lamp
|
Rheostat Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad side switch assembly (A).
3.
...
Front Fog Lamps Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
...
See also:
Component Replacement After Deployment
Before doing any SRS repairs, use the GDS Pro to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing ...
Power Outside Mirror Switch Inspection
1.
Disconnect the power door mirror switch module connector from
front door trip panel.
2.
Check for the continuity between termina ...
Crankshaft Position Sensor (CKPS) Circuit Diagram
(M/T)
(A/T)
...
Copyright © www.kifomanual.com 2014-2025