Kia Forte: Front Fog Lamps Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Front Fog Lamps Removal
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
|
| 3. |
Remove the front fog lamp connectors (A) from the front bumper.
[LH]
[RH]
|
| 4. |
Remove the front fog bulb (A) turning it in the counterclockwise
direction.
|
| 5. |
Remove the front fog lamp assembly (A) after loosening the screws.
|
Front Fog Lamps Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the lighting switch of the multi-function switch.
(Refer to Multifunction Swit ...
Front Fog Lamps Installation
1.
Install the front fog bulb.
2.
Reconnect the lamp connector.
3.
Install the front bumper cover.
...
See also:
On-vehicle Inspection
Inspect ignition coil assembly and
Perform spark test
1.
Check for DTCs.
...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by the signal from the control unit. Pressing the intake selection switch
will shift between recirculation and ...
Rear Hub - Carrier Components
1. Rear torsion beam axle assembly
2. Rear dust cover
3. Rear wheel hub assembly
4. Rear brake disc
...
Copyright © www.kifomanual.com 2014-2025