Kia Forte: Front Fog Lamps Installation - Lighting System - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Front Fog Lamps Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Front Fog Lamps Installation

1.
Install the front fog bulb.
2.
Reconnect the lamp connector.
3.
Install the front bumper cover.
Front Fog Lamps Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") ...

High Mounted Stop Lamp Removal
[2 Door] 1. Disconnect the negative (-) battery terminal. 2. Remove the rear roof trim. (Refer to Body - "Roof Trim Assembly&qu ...

See also:

Line Pressure Control Solenoid Valve Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Injector Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line (Refer to the ...

Front Body
Front Body A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Front Body B * These dimensions indicated in th ...

Copyright © www.kifomanual.com 2014-2025