1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
|
3. |
Remove the driver side shower duct after loosening the screw.
|
4. |
Disconnect the PTC heater connector (A).
|
5. |
Remove the PTC heater core (A) after loosening the PTC heater
mounting screws.
|
6. |
Install in the reverse order of removal.
|
Specifications
AVN Head Unit
Item
Specification
Power supply
DC 14.4V negative ground
Load Impedance
4ohm × 4
Tuning type
PLL SYNTH ...
Components Location
1. Purge Control Solenoid Valve (PCSV)
2. Vapor line
3. ORVR valve
4. Fuel tank air filter
5. Canister Close Valve (CCV)
6. Canister
7. Fuel Tank Pressure Sensor ( ...
Alternator Circuit Diagram
•
COM signal - When
controlling the voltage generated, the ECM sends the target
...