Kia Forte: Important Safety Notice - General Information - Kia Forte TD 2014-2018 Service ManualKia Forte: Important Safety Notice

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / General Information / Important Safety Notice

Proper service methods and repair procedures are essential for safe, reliable operation of all motor vehicles as well as personal safety of the operator. The service procedures and descriptions in this shop manual provide general directions for a service and repair.
Procedure, techniques, tools, and parts for service including the skill of the technician vary. It is impossible to provide advice or caution as to each case in this manual.
Accordingly, anyone who intends to use a replacement part, service procedure, or tool, which is not recommended by the vehicle manufacturer, must first assure thoroughly that neither their personal safety nor the safe operation of the vehicle will be first jeopardized by the replacement part, service procedure, or tool they select.
 
  
Reminds you to be especially careful in those areas where carelessness will cause death or serious injury.
  
Reminds you to be especially careful in those areas where carelessness may cause death or serious injury.
  
Reminds you to be especially careful in those areas where carelessness may cause personal injury.
  
Gives you information that will prevent you from making errors that could damage the vehicle.
  
Gives you added information that will help you complete a particular procedure.
The following list contains some general WARNINGS that you should follow while working on a vehicle.
Always wear safety glasses for eye protection.
Use safety stands whenever a procedure requires you to be under the vehicle.
Make sure that the ignition switch is always in the OFF position, unless otherwise required by the procedure.
Set the parking brake when working on the vehicle. If you have an automatic transaxle, set in park unless instructed otherwise for a specific operation.
Place supporters against the front and rear surfaces of the tires to help prevent the vehicle from moving.
Operate the engine only in a well-ventilated area to avoid the danger of carbon monoxide poisoning.
Keep yourself and your clothing away from moving parts when the engine is running, especially the drive belts.
To prevent serious burns, avoid contact with hot metal parts such as the radiator, exhaust manifold, tail pipe, catalytic converter and muffler.
Do not smoke while working on a vehicle.
To avoid injury, always remove rings, watches, loose hanging jewelry, and loose clothing before beginning to work on a vehicle.
When it is necessary to work under the hood, keep hands and other objects clear of the radiator fan blades! Your vehicle may be equipped with a cooling fan that may turn on, even though the ignition switch is in the OFF position. For this reason care should be taken to ensure that the radiator fan electric motor is completely disconnected when working under the hood and the engine is not running.
General Information
...

Identification Number
Identification Number Description Vehicle Identification Number 1. World Manufacturer Identifier (WMI) - KNA : Passenger vehicle, MPV(Multipurpose Passen ...

See also:

Warning Lamp Activation
Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. T ...

Components Location
1. Oil filler plug 2. Oil drain plug ...

Sunroof Guide Replacement
1. Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") 2. Remove a drip link assembly (A) after lowering a gu ...

Copyright © www.kifomanual.com 2014-2024