Kia Forte: Engine Mounting Components

Engine Room Under Cover Removal and Installation

1. Remove the under cover front panel (A). 2. Remove the under covers (B). Tightening torque: 3.9 ~ 5.9 N ...

Engine Mounting Removal and Installation

Engine mounting bracket 1. Install the jack to the edge of oil pan to support the engine.    ...

See also:

Air Ventilation Seat Unit Circuit Diagram
...

Components Location
1. Battery sensor 2. Brake Booster Vacuum Pressure Sensor (BBVPS) 3. AGM battery 4. DC/ DC Converter 5. ISG OFF Switch 6. Alternator 7. Starter 8. Brake switch ...

Components
(4Door, 5Door) 1. Front pillar trim 2. Center pillar lower trim 3. Center pillar upper trim 4. Rear pillar trim 5. Rear wheel house trim 6. Cowl side trim ...