1. |
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
|
2. |
Set No.1 cylinder to TDC (Top dead center) on compression stroke.
|
3. |
Remove the timing chain cover.
(Refer to Timing System - "Timing Chain Cover")
|
4. |
Remove the timing chain tensioner (A).
|
5. |
Remove the timing chain tensioner arm (A).
|
6. |
Remove the timing chain (A).
|
7. |
Remove the timing chain guide (A).
|
Side Airbag (SAB) Module
The Side Airbags (SAB) are installed inside the front seat and protects
the driver and passenger from danger when side crash occurs. The SRSCM determines
deployment of side airbag by using Si ...
Accelerator Position Sensor (APS) Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal
module and detects the rotation angle of the accelerator pedal. The APS is one
of the most important sensors in engine ...
Checking the washer fluid level
Check the fluid level in the washer fluid reservoir and add fluid if necessary.
Plain water may be used if washer fluid is not available.
However, use washer solvent with antifreeze characterist ...