Fan Motor |
1. |
Disconnect the fan motor connector from the resistor.
|
2. |
Connect the battery voltage to the "+" terminal and ground to
"-" terminal.
|
3. |
Check the cooling fan motor operates well.
|
Cruise Control Switch Inspection
[Measuring Resistance]
1.
Check for resistance between terminals in each switch position.
Function
switch
Connector
termi ...
Front Impact Sensor (FIS)
The front impact sensor (FIS) is installed in the front side member. They
are remote sensors that detect acceleration due to a collision at its mounting
location. The primary purpose of the F ...
Removal
1.
Remove the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
2.
Remove the concentric slave cyl ...