Kia Optima Manuals

Kia Forte: Oil Pump Removal and Installation - Lubrication System - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Oil Pump Removal and Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Lubrication System / Oil Pump Removal and Installation

1.
Remove the timing chain cover.
(Refer to Timing System – “Timing Chain Cover”)
2.
Remove the oil pump cover (A).
Tightening torque
Screws :
5.9 ~ 8.8 N.m (0.6 ~ 0.9 kgf.m, 4.3 ~ 6.5 lb-ft)
Bolts :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

3.
Remove the inner rotor (A) and outer rotor (B).
4.
Install in the reverse order of removal.
Oil Pump Components
1. Inner roter 2. Outer roter 3. Oil pump cover 4. Relief plunger 5. Relief spring 6. Relief plug 7. O-ring (suction side) 8. O-ring (discharge side) ...

Oil Pump Inspection
1. Remove the relief plunger. Remove the plug (A), spring (B) and relief plunger (C). Tightening torque Plug (A) : ...

See also:

35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications
Direct control VFS[35R/C] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA) ...

Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly. Open the hood after turning off the engine on a flat surface, shifting the shift lever to the P(Park) position f ...

Transaxle Oil Temperature Sensor Installation
1. Install in the reverse order of removal.    After replacement or reinstal ...

Categories

Copyright www.kifomanual.com 2014-2026