Kia Forte: Battery Sensor Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Charging System / Battery Sensor Removal
| 1. |
Disconnect the battery negative (-) cable.
|
| 2. |
Disconnect the battery sensor connector (A).
|
| 3. |
Remove the battery negative (-) cable after removing the bolt
(B).
|
Battery Sensor Description
Vehicles have many control units that use more electricity. These units
control their own system based on information from diverse sensors. It is important
to have a stable power supply as th ...
Battery Sensor Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1
lb-ft)
...
See also:
Crankshaft Disassembly
•
Use fender covers to avoid damaging painted surfaces.
•
...
Cooling Fan Disassembly
1.
Remove the cooling fan (A) from the cooling fan assembly.
2.
Disconnect the fan motor connector (A) from the resistor.
...
Air Ventilation Seat Unit Description
The ventilated seat system uses a Push method to cool the seat. A blower
mounted in the seat generates the cool air, which then travels through ducts
to the seat back and cushion.
...
Copyright © www.kifomanual.com 2014-2025