Kia Forte: Charging System
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Charging System
- Description
- On-vehicle Inpection
- Alternator Description
- Alternator Specification
- Alternator Components
- Alternator Circuit Diagram
- Alternator Removal
- Alternator Installation
- Alternator Disassembly
- Alternator Reassembly
- Alternator Inspection
- DC/DC Converter Description
- DC/DC Converter Operation Principle
- DC/DC Converter Component Location
- DC/DC Converter Circuit Diagram
- DC/DC Converter Removal
- DC/DC Converter Installation
- Battery Description
- Battery Specifications
- Battery Components
- Battery Adjustment
- Battery Removal
- Battery Installation
- Battery Vehicle parasitic current inspection
- Battery Cleaning
- Battery Troubleshooting
- Battery Sensor Description
- Battery Sensor Removal
- Battery Sensor Installation
Spark Plug Installation
1.
Install in the reverse order of removal.
Tightening torque:
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)
...
Description
The charging system included a battery, an alternator with a built-in
regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC curre ...
See also:
Center Pillar Trim Component Location
(4Door, 5Door)
1. Center pillar lower trim
2. Center pillar upper trim
(2Door)
1. Rear inner outer trim
2. Center pillar upper ...
In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel.
The sensor contains a thermistor which measures the temperature of the
inside. The signal decided by the resistance ...
Specifications
Item
Specifications
Transaxle type
A6GF1
Engine model
Gasoline 1.8 MPI
Torque converter type
3-element, 1-stage, 2-phase type
...
Copyright © www.kifomanual.com 2014-2024