Kia Forte: Alternator Installation - Charging System - Engine Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Alternator Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Charging System / Alternator Installation

1.
Install in the reverse order of removal.
2.
Adjust the alternator belt tension after installation.
(Refer to Engine Mechanical System - "Drive Belt")

Alternator installation bolt:
[M10] 29.4 ~ 41.2 N.m (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 Ib-ft)
[M8] 21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 15.9 ~ 23.9 Ib-ft)
Alternator brace mounting bolt:
21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 15.9 ~ 23.9 Ib-ft)

Alternator Removal
1. Disconnect the battery negative terminal. 2. Remove the drive belt. (Refer to Engine Mechanical System - "Drive Belt") ...

Alternator Disassembly
1. Remove the rear cover (A) after removing nuts (B). 2. Remove the mounting bolts (A) and the regulator assembly (B). ...

See also:

Rear Door Window Glass Replacement
(4Door, 5Door) 1. Pull down rear door window glass by pressing the power window glass switch. 2. Remove the rear door trim. ...

Seat belt restraint system
Seat belts are designed to bear upon the bony structure of the body, and should be worn low across the pelvis, chest and shoulders as applicable. Wearing the lap section of the belt across the abdom ...

General
1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is ...

Copyright © www.kifomanual.com 2014-2025