[Rotor] |
1. |
Check that there is continuity between the slip rings (C).
|
2. |
Check that there is no continuity between the slip rings and the
rotor (B) or rotor shaft (A).
|
3. |
If the rotor fails either continuity check, replace the alternator.
|
[Stator] |
1. |
Check that there is continuity between each pair of leads (A).
|
2. |
Check that there is no continuity between each lead and the coil
core.
|
3. |
If the coil fails either continuity check, replace the alternator.
|
Turn Signal Lamp
Removal
1.
Remove the outside rear view mirror.
(Refer to Body - "Outside Rear View Mirror")
Installation
1.
Install the out ...
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Camshaft Position Sensor (CMPS) Removal
•
DON’T remove the camshaft position sensor during engine
running or right after engine ...