Kia Forte: System Block Diagram
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Cruise Control System / System Block Diagram
Component Parts And Function Outline
| Component part |
Function |
| Vehicle-speed sensor |
Converts vehicle speed to pulse. |
| ECM |
Receives signals from sensor and control switches. |
| Cruise control indicator |
Illuminate when CRUISE main switch is ON (Built into cluster) |
| Cruise Control switches |
ON/OFF switch |
Switch for automatic speed control power supply. |
| Resume/Accel switch |
Controls automatic speed control functions by Resume/Accel switch
(Set/Coast switch) |
| Set/Coast switch |
|
| Cancel switches |
Cancel switch |
Sends cancel signals to ECM. |
| Brake-pedal switch |
|
| Transaxle range switch (A/T) |
|
| ETS motor |
Regulates the throttle valve to the set opening by ECM. |
* ETS : Electronic Throttle System
Cruise Control
The cruise control system is engaged by the cruise "ON/OFF" main switch
located on right of steering wheel column. The system has the capability to
cruise, coast, accelerate and res ...
Trouble Symptom Charts
Trouble Symptom 1
Trouble Symptom 2
Trouble symptom
Probable cause
Remedy
The set vehicle speed varies greatly upward or downward
&qu ...
See also:
Starter Installation
1.
Install in the reverse of removal.
...
Compressor Removal
1.
If the compressor is marginally operable, run the engine at idle
speed, and let the air conditioning work for a few minutes, then shut
the engine off.
...
Inspection
1.
Inspect diaphragm spring wear which is in contact with a clutch
release bearing.
2.
Check the clutch cover and disc surface for wear or ...
Copyright © www.kifomanual.com 2014-2025