Kia Forte: Cruise Control Switch Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Electrical System / Cruise Control System / Cruise Control Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
|
| 3. |
Remove the steering wheel.
(Refer to Steering System - "Steering Column and Shaft")
|
| 4. |
Remove the steering wheel cover (A) after loosening the screw.
|
| 5. |
Disconnect the steering heater connectors (A).
|
| 6. |
Remove the steering remote control switch assembly after loosening
the mounting screws (4EA).
|
| 7. |
Disconnect the switch connectors (A).
|
| 8. |
Remove the cruise control switch (A) after loosening the mounting
screws.
|
Cruise Control Switch Inspection
[Measuring Resistance]
1.
Check for resistance between terminals in each switch position.
Function
switch
Connector
termi ...
Cruise Control Switch Installation
1.
Reassemble the cruise control switch after connecting the connector.
2.
Reassemble the driver airbag module.
...
See also:
Transaxle Oil Temperature Sensor Circuit Diagram
...
Back up lamp, Rear fog lamp
1. Take the lamp assembly out.
2. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly.
3. Remove the bulb by ...
Installation
•
If the oil seal on the transaxle case side is damaged
and fluid is leaking, replace ...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright www.kifomanual.com 2014-2026