Kia Forte: Specifications - Emission Control System - Kia Forte TD 2014-2018 Service ManualKia Forte: Specifications

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Specifications

Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
22.0 ~ 26.0 [20°C(68°F)]

Fuel Tank Pressure Sensor (FTPS)
▷ Type: Piezo-Resistive Pressure Sensor
▷ Specification
Pressure [kPa (kgf/cm², in H2O)]
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
+6.67 (0.068, 26.8)
4.5

Canister Close Valve (CCV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
19.5 ~ 22.5 [20°C(68°F)]

Emission Control System
...

Tightening Torques
Item kgf.m N.m lb-ft Positive crankcase ventilation valve installation 0.2 ~ 0.3 1.96 ~ 2.94 1.45 ~ 2.17 Canister install ...

See also:

Steering Gear box Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

Lubricants
Engine TM Joint Lubricants Quantity Nu 1.8 MPI 6 M/T BJ RBA 90g TJ CW09-VX21 135g Nu ...

Transmitter Inspection
1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery (A) and check ...

Copyright © www.kifomanual.com 2014-2025