Kia Forte: Components Location - Evaporative Emission Control System - Emission Control System - Kia Forte TD 2014-2018 Service ManualKia Forte: Components Location

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Evaporative Emission Control System / Components Location

1. Purge Control Solenoid Valve (PCSV)
2. Vapor line
3. ORVR valve
4. Fuel tank air filter
5. Canister Close Valve (CCV)
6. Canister
7. Fuel Tank Pressure Sensor (FTPS)

Schematic Diagram
Canister The Canister is filled with charcoal and absorbs evaporated fuel vapor from the fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PC ...

Inspection
[EVAP. Leakage Test] 1. Select "Evap. Leakage Test". 2. Proceed with the test according to the screen introductio ...

See also:

Starter Removal
1. Disconnect the battery negative (-) cable. 2. Remove the air duct and air cleaner assembly. (Refer to Engine Mechanical System - &qu ...

Steering wheel
Electric power steering (EPS) Power steering uses the motor to assist you in steering the vehicle. If the engine is off or if the power steering system becomes inoperative, the vehicle may still be ...

Lift And Support Points
   When heavy rear components such as suspension, fuel tank, spare tire, tailgate and trunk lid are to be removed, place ad ...

Copyright www.kifomanual.com 2014-2026