Kia Forte: Front Door Belt Inside Weatherstrip Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Belt Inside Weatherstrip Replacement
| 1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
| 2. |
Remove the front door belt inside weatherstrip (A).
(4Door, 5Door)
(2Door)
|
| 3. |
Install in the reverse order of removal.
|
Front Door Latch Replacement
(4Door, 5Door, 2Door)
1.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
2.
Disconnect ...
Front Door Side Weatherstrip Replacement
(4Door, 5Door)
1.
Loosen the front door checker (B) mounting bolt.
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ...
See also:
Operation
Evaporative System Monitoring
Evaporative And ORVR Emission Control System
This system consists of a fill vent valve, fuel shut-off valve, fuel cut
valve (for roll over), two way val ...
Relay Box (Passenger Compartment) Inspection
1.
The SJB can be diagnosed by using the GDS. The SJB communicates
with the GDS which then displays inputs and outputs along with codes.
2.
...
Heated Oxygen Sensor (HO2S) Specification
HO2S [Bank 1/Sensor 1] (Linear type)
Item
Specification
Heater Resistance (Ω)
2.4 ~ 4.0 [20°C(68°F)]
HO2S [Bank 1/Sensor 2] (Binary type)
...
Copyright © www.kifomanual.com 2014-2025