Kia Forte: Manifold Absolute Pressure Sensor (MAPS) Specification
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Specification
| Pressure [kPa (kgf/cm², psi)] |
Output Voltage (V) |
| 20.0 (0.20, 2.9) |
0.79 |
| 46.7 (0.47, 6.77) |
1.84 |
| 101.3 (1.03, 14.7) |
4.0 |
Manifold Absolute Pressure Sensor (MAPS) Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor
and is installed on the surge tank. It senses absolute pressure of the surge
tank and transfers the analog signal propo ...
Manifold Absolute Pressure Sensor (MAPS) Circuit Diagram
(M/T)
(A/T)
...
See also:
Wipers & Washers
A : Wiper speed control (front)
· HI – High wiper speed
· LO – Low wiper speed
· INT – Intermittent wipe
· AUTO– Automatic control wipe
· OFF – Off
· MIST – Single wipe
B : Interm ...
SS-B Solenoid Valve(ON/OFF) Description
Shift Solenoid(SS) Valve-B is attached to the valve body and is an on/off
solenoid valve that is used to change gears. Shift Solenoid(SS) Valve-B is installed
at valve body.
...
Installation
1.
Install the horn and connect the horn connector.
2.
Reassemble the front bumper cover.
...
Copyright © www.kifomanual.com 2014-2025