Kia Forte: Heated Oxygen Sensor (HO2S) Circuit Diagram

Heated Oxygen Sensor (HO2S) Specification

HO2S [Bank 1/Sensor 1] (Linear type) Item Specification Heater Resistance (Ω) 2.4 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] (Binary type) ...

Heated Oxygen Sensor (HO2S) Inspection

1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S termi ...

See also:

Multimedia Jack Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the floor console assembly. (Refer to Body - "Floor Console Assembly&quo ...

Cooling Fan Inspection
Fan Motor 1. Disconnect the fan motor connector from the resistor. 2. Connect the battery voltage to the "+" terminal and ...

CVVT Oil Control Valve (OCV) Installation
   • Install the component with the specified torques. • ...