Kia Forte: Components Location - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Components Location

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Components Location

1. Battery sensor
2. Brake Booster Vacuum Pressure Sensor (BBVPS)
3. AGM battery
4. DC/ DC Converter
5. ISG OFF Switch
6. Alternator
7. Starter
8. Brake switch
9. Door switch
10. Seat belt switch
11. Hood switch
12. Electric Oil Pump (EOP)
13. Oil Pump Unit (OPU)

1. Battery sensor
3. AGM battery
2. Brake Booster Vacuum Pressure Sensor (BBVPS)

4. DC/ DC Converter (LDC)
5. ISG OFF Switch

6. Alternator
7. Starter

8. Brake switch
9. Door switch

10. Seat belt switch
11. Hood switch

12. Electric Oil Pump (EOP)
13. Oil Pump Unit (OPU)


Operation Condition for the ISG function
1. Auto stop or Auto start condition (If all of the below condition are satisfied) Items State Remark Driving conditions ISG OFF Switch ...

Battery Sensor Description
Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as th ...

See also:

Front Door Latch Component Location
(4Door, 5Door, 2Door) 1. Front door latch ...

Mode Control Actuator Description
The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Description
Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter. ...

Copyright © www.kifomanual.com 2014-2026