Kia Forte: Torque Converter Control Solenoid Valve (T/CON_VFS) Description

Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter.

Output Speed Sensor Installation

1. Install in the reverse order of removal.    After replacement or reinstal ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Direct control VFS[T/CON] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54) Current value(mA) ...

See also:

Alternator Removal
1. Disconnect the battery negative (-) cable. 2. Remove the drive belt. (Refer to Engine Mechanical System - "Timing Chain") ...

Component Location
1. Rear glass defogger relay (Engine room relay box) 2. Rear glass defogger switch (A/C controller) 3. Rear glass defogger ...

Cruise Control Switch Installation
1. Reassemble the cruise control switch after connecting the connector. 2. Reassemble the driver airbag module. ...