Kia Forte: Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
| Control Pressure kpa (kgf/cm², psi) |
9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54) |
| Current value(mA) |
50 ~ 850 |
| Internal resistance(Ω) |
5.1 |
Torque Converter Control Solenoid Valve (T/CON_VFS) Description
Torque converter control solenoid valve (T/CON_VFS) is attached to the
valve body. This variable force solenoid valve directly controls the hydraulic
pressure inside the torque converter.
...
See also:
Control Cable Adjustment
Select cable adjustment
1.
Remove the select cable snap pin (A) and then remove the select
cable (B) from the shift lever pin.
2.
...
Fuel Tank Air Filter Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Lift the vehicle.
3.
Dis ...
Replacement
When the receiver first arrives for replacement:
1)
It will be in Virgin State.
...
Copyright © www.kifomanual.com 2014-2025