Kia Forte: Door Switch Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Door Switch Inspection
| 1. |
Remove the door switch and check for continuity between the terminals.
|
Door Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver
has fastened the seat belt/door. If the driver has not fastened the seat belt/door,
the ISG function reacts as follo ...
Door Switch Removal
1.
Remove the door switch (A) after loosening the bolt.
...
See also:
Steering Column Shroud Panel Component Location
1. Steering column shroud lower panel
2. Steering column shroud upper panel
...
Battery Sensor Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~10.1
lb-ft)
...
Front Door Latch Replacement
(4Door, 5Door, 2Door)
1.
Remove the front door module.
(Refer to Front Door - "Front Door Module")
2.
Disconnect ...
Copyright © www.kifomanual.com 2014-2025