Kia Forte: Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Ignition Lock Switch / Specifications
| Item |
Specifications |
| Working voltage |
DC 12V |
| Operating force |
9.8 ± 2.9N (1.0 ± 0.3kg, 7.2 ± 0.7lb) |
| Working temperature |
-40°C ~ 80°C (-40°F ~ 176°F) |
Description
•
Component location : Ignition
lock switch is connected to clutch pedal assembly.
•
Function
1.
Start is po ...
Inspection
Component Inspection
1.
Remove the ignition lock switch.
2.
Push the ignition lock switch in the direction of the arrow to
make sure t ...
See also:
Removal
1.
Separate the push rod (C) after remove the pin (A) and washer
(B).
2.
Remove the battery.
(Refer to Engine Electrical S ...
PTC Heater Inspection
Operating Logic Test (Manual only)
Inspect the PTC operation with the confirmation logic below :
1.
Entering
(1)
Set the Floor mode ...
Drive Belt Tensioner Inspection
Check the belt tensioner for excessive foreign substances, crack, damage
or sticking of pivot shaft. Replace if necessary. ...
Copyright © www.kifomanual.com 2014-2025