Kia Forte: Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Clutch Pedal / Installation
| 1. |
Install in the reverse order of removal.
|
| 2. |
After be equipped, perform bleeding air procedure in clutch release
cylinder after pouring the brake fluid.
(Refer to Clutch System - "Clutch release cylinder")
|
Removal
1.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
2.
Remove the ECM.
(Refer to Engine Control/Fu ...
See also:
Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents
are as follows:
1.
Connect self-diagnosis connector(16pins) located in the lower
of driv ...
Components Location
1. Automatic transaxle
2. Inhibitor switch
3. Transaxle Control Module (TCM)
4. Valve body cover
5. Solenoid valve connect
6. Oil temperature sensor
7. Valve body assembly ...
ESC OFF Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad side switch assembly (A).
3.
D ...
Copyright © www.kifomanual.com 2014-2024