Kia Forte: Inspection
| 1. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
| 2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
| 3. |
Disconnect the back up lamp switch connector (A).
|
| 4. |
Check the continuity between no. 1 and 2 terminals of backup lamp
switch. When the shift lever is in reverse, there should be continuity.
|
Specification
Item
Specification
Current voltage
13V
Working voltage
DC 10~15V
Operating force
3.0kg Max
Voltage ...
Replacement
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray ...
See also:
Blower Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit")
...
Auto Defogging Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the sensor cover (A) and then remove the auto defogging
sensor (B).
...
Installation
Pressure Side Impact Sensor
1.
Install the new pressure side impact sensor with the screws (B)
then connect the pressure side impact sensor connector (A).
...
Copyright © www.kifomanual.com 2014-2025