Item |
Specification |
Type |
Hall sensor |
Working voltage |
6.5 ~1 5V |
Output voltage |
VL ≤ 0.5 V (When output current is 15mA flows) |
Installation
1.
Pre-tighten the bracket fixing bolt (A) in dash panel.
2.
Install the brake booster and brake pedal member fixing nuts (A)
secur ...
BCM Diagnosis With GDS
1.
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output
value and drives the ac ...
Rear Door Outside Handle Replacement
(4Door, 5Door)
1.
Remove the hole plug (B).
2.
After loosening the mounting bolt, then remove the rear door outside
handle cov ...