Kia Forte: Oil Pump Components
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Hydraulic System / Oil Pump Components
| 1. Oil pump cover 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal |
6. Bushing-housing 7. Reaction shaft 8. Bushing-reaction shaft 9. Sleeve 10. Bolt |
Oil Pump Operation Flow
| 1. Inhale(Oil filter) 2. Inhale(Valve body) 3. Outlet 4. 26 Brake (26/B) operation pressure |
5. 35R Clutch (35R/C) operation pressure 6. Lubrication 7. Lock up clutch operation pressure 8. Lock up clutch cancellation |
Oil Pump Description
The oil pump is built-in as a single unit with the 26 Brake chamber. Rotation
of the pump builds the hydraulic pressure needed for the lubrication of the
various parts of the transaxle and op ...
Fluid Components Location
1. Injection hole(eyebolt)
2. Oil level plug
3. Oil drain plug
...
See also:
Installation
1.
Pre-tighten the bracket fixing bolt (A) in dash panel.
2.
Install the brake booster and brake pedal member fixing nuts (A)
secur ...
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the battery (A) and ECM (B).
...
TPMS Sensor
1.
Storage State
Sensors are in this state when they first arrive at dealership.
This state is entered by LF request/command only.
Either LF request ...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright � www.kifomanual.com 2014-2026