Kia Forte: Output Speed Sensor Specifications
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Specifications
▷ Type: Hall effect sensor
| Operation condition [°C(°F)] |
((-)40 ~ 150)) -40 ~ 302 |
|
| Air gap(mm)in. |
(1.1 ~ 1.55) 0.043 ~ 0.061 |
|
| Output voltage |
High |
1.18 ~ 1.68 |
| Low |
0.59 ~ 0.84 |
|
Output Speed Sensor Description
The output speed sensor is a vital unit that measures the rate of rotation
of the transaxle's turbine shaft and output shaft, and delivers the readings
to the Transaxle Control Module(TCM ...
See also:
Parking Assist System Switch Installation
1.
Install the switchs and connect the switch connectors.
2.
Insatll the floor console assembly.
3.
Connect the ...
Inspection
Lighting Switch Inspection
With the multifunction switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, replace
the mul ...
Spark Plug Removal
1.
Remove the ignition coil.
(Refer to Ignition System - "Ignition Coil")
2.
Using a spark plug wrench, remove the spark plu ...
Copyright © www.kifomanual.com 2014-2025