Kia Forte: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications

Direct control VFS[UD/B]
▷ Control type : Normal high type
Control Pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42)
Current value(mA)
50 ~ 850
 Internal resistance(Ω)
5.1

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Description
Underdrive Brake(UD/B) Control Solenoid is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the Underdrive Brake(UD/B). ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Circuit Diagram
...

See also:

Identification Number
Identification Number Description Vehicle Identification Number 1. World Manufacturer Identifier (WMI) - KNA : Passenger vehicle, MPV(Multipurpose Passen ...

Fuel Tank Pressure Sensor (FTPS) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the rear seat. (Refer to Body - “Rear Se ...

Parking Brake Cable Installation
1. Install the parking brake cable (A). Tightening torque : 8.8 ~ 14.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft) ...

Copyright www.kifomanual.com 2014-2026