Kia Forte: SS-B Solenoid Valve(ON/OFF) Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-B Solenoid Valve(ON/OFF) Installation

1.

Install in the reverse order of removal.

•	When installing, apply the ATF oil or white vaseline to the O-ring (A) not to be damaged.

•	The gasket of the valve body gasket (A) use new one.

•	Adding automatic transaxle fluid. (Refer to Hydraulic System - "Fluid")

SS-B Solenoid Valve(ON/OFF) Removal

1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Inhibitor Switch Description

Inhibitor Switch monitors the lever's position(P, R, N, D) and is used to control gear setting signals. ...

See also:

35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications
Direct control VFS[35R/C] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA) ...

Trunk Lid Latch Component Location
(4Door) 1. Trunk lid latch assembly (2Door) 1. Trunk lid latch assembly ...

Output Speed Sensor Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Categories

Copyright � www.kifomanual.com 2014-2026