Kia Forte: Inhibitor Switch Description

Inhibitor Switch monitors the lever's position(P, R, N, D) and is used to control gear setting signals.

SS-B Solenoid Valve(ON/OFF) Installation

1. Install in the reverse order of removal.    • ...

Inhibitor Switch Specifications

▷ Type: Combination of output signals from 4 terminals Power supply (V) 12 Output type Combination of output signals Signal Code Table ...

See also:

Door Switch Inspection
1. Remove the door switch and check for continuity between the terminals. ...

26 Brake Control Solenoid Valve(26/B_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Room lamp
To turn the room lamp ON or OFF, push the switch. If your vehicle is not equipped with a map lamp, the room lamp will also turn on or off as follows. The room lamp comes on when a door is opene ...