Kia Forte: Troubleshooting
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Driveshaft and axle / Troubleshooting
| Trouble Symptom |
Probable cause |
Remedy |
| Vehicle pulls to one side |
Scoring of driveshaft ball joint |
Replace |
| Wear, rattle or scoring of wheel bearing |
Replace |
|
| Defective front suspension and steering |
Adjustment or Replace |
|
| Vibration |
Wear, damage or bending of driveshaft |
Replace |
| Driveshaft rattle and hub serration |
Replace |
|
| Wear, rattle or scratching of wheel bearing |
Replace |
|
| Shimmy |
Defective wheel balance |
Adjustment or Replace |
| Defective front suspension and steering |
Adjustment or Replace |
|
| Excessive noise |
Wear, damage or bending of driveshaft |
Replace |
| Rattle of driveshaft and worn hub splines |
Replace |
|
| Wear, rattle or scoring of wheel bearing |
Replace |
|
| Loose hub nut |
Adjustment or Replace |
|
| Defective front suspension and steering |
Adjustment or Replace |
Special Service Tools
Tool Name / Number
Illustration
Description
Band installer
09495-3K000
Installation of ear type boot band
Puller
09495-33000 ...
See also:
Starter Description
The starting system includes the battery, starter, solenoid switch, inhibitor
switch (A/T), ignition switch, ignition lock switch, connection wires and the
battery cable.
When the ignitio ...
Circuit Diagram
...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Copyright © www.kifomanual.com 2014-2025