Kia Forte: Circuit Diagram
| Hamess Connector |
| Pin No. |
Discription |
Remark |
| 1 |
- |
|
| 2 |
- |
|
| 3 |
- |
|
| 4 |
Vehicle Ground |
|
| 5 |
CAN_HIGH |
|
| 6 |
Battery |
|
| 7 |
- |
|
| 8 |
- |
|
| 9 |
- |
|
| 10 |
- |
|
| 11 |
CAN_LOW |
|
| 12 |
Ignition |
Components
1. Receiver
2. TPMS Sensor
3. TPMS Sensor
4. TPMS Sensor
5. TPMS Sensor
...
Description
TREAD Lamp
-
Tire Under Inflation / Leak Warning.
1.
Turn on condition
A.
When tire pressure is below a ...
See also:
Auto Defogging Sensor Description
The auto defogging sensor is installed on the front windshield glass.
The auto defogging sensorr senses moisture on the windshild. The air conditioner
control module receives the signal from ...
Headlamp welcome
When the headlight(light switch in the headlight or AUTO position) is on and
all doors (and trunk/tailgate) are locked and closed, the headlight, position light
and tail light will come on for 1 ...
Power Outside Mirror Switch Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
...
Copyright © www.kifomanual.com 2014-2024