Kia Forte: Components

Seat Belt Buckle Sensor (BS)

The SRSCM shall monitor the status of the driver and passenger seat belt buckle. The SRSCM provides one pin each for the driver and passenger seat belt buckle status input. The seat belt buck ...

Removal

1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. ...

See also:

Audio Unit Removal
   • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...

Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents are as follows: 1. Connect self-diagnosis connector(16pins) located in the lower of driv ...

On-vehicle Inpection
   • First of all, check for DTCs. If a DTC is present, perform troubleshooting in accordan ...