Kia Forte: Brake System

Installation

1. Remove ignition key from the vehicle. 2. Disconnect the negative (-) cable from battery and wait for at least thirty seconds. ...

Specifications

Item Specification Master cylinder Type Fixed seal Cylinder I.D. 22.22 mm Piston stroke 45 ± 1 mm (1.77 ± 0.039 in) ...

See also:

Front Driveshaft Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

2. TCM Terminal Function
Connector [A] Pin Description Pin Description 1 - 54 - 2 Line pressure control solenoid valve (LINE_VFS) 55 ...

Tightening Torques
Item N.m kgf.m lb-ft Ignition coil installation bolt 9.8 ~ 11.8 1.0 ~ 1.2 7.2 ~ 8.7 Spark plug installation 14.7 ~ 24. ...