Kia Forte: Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / Brake System / Vacuum Pump / Installation
| 1. |
Install in the reverse order of removal.
|
| 2. |
Tighten the vacuum pump mounting bolts to the specified torque.
|
Inspection
1.
Check the brake warning lamp in the IGN ON position.
Brake warnin ...
Master Cylinder
Components
1. Reservoir cap
2. Reservoir
3. Grommet
4. Master cylinder
...
See also:
Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B)
by moving it up or down, or right or left.
2.
Adjust the hood height by ...
Variable Intake Solenoid(VIS) Actuator Removal and Installation
1.
Disconnect the vacuum hose (A).
2.
Remove the variable Intake solenoid (VIS) actuator (B)
Tightening torque :
...
ETC (Electronic Throttle Control) System Fail-Safe Mode
Item
Fail-Safe
ETC Motor
Throttle valve stuck at 7°
TPS
TPS 1 fault
Replace it with TPS 2
TPS 2 fault
Replace it with T ...
Copyright © www.kifomanual.com 2014-2025