Kia Forte: Front Wheel Guard Replacement - Body Side Moulding - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Front Wheel Guard Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Front Wheel Guard Replacement

  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the front tire.
2.
After loosening the mounting clips and screws, then remove the front wheel guard (A).

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Roof Garnish Replacement
   • Put on gloves to protect your hands. &n ...

Rear Wheel Guard Replacement
   • Put on gloves to protect your hands. &nb ...

See also:

Inspection
Driver Airbag (DAB) If any improper parts are found during the following inspection, replace the airbag module with a new one.    ...

26 Brake Control Solenoid Valve(26/B_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

[CVVT System Mode]
(1) Low Speed / Low Load (2) Part Load (3) Low Speed / High Load (4) High Speed / High Load ...

Copyright © www.kifomanual.com 2014-2025