Kia Forte: Hood Latch Component Location

Hood Latch Release Handle Replacement

1. After loosening the mounting screw, then remove the hood latch release handle (A). 2. Install in the reverse order of removal. ...

Hood Latch Replacement

1. Disconnect the hood latch connector (A). 2. Remove the hood latch assembly (A) mounting bolts. Tightening ...

See also:

Line Pressure Control Solenoid Valve Specifications
Direct control VFS[Line Pressure] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current val ...

Rear Seat Belt Retractor Component Location
(4Door, 2Door) 1. Rear seat belt retractor (5Door) 1. Rear seat belt retractor ...

Fuel Tank Pressure Sensor (FTPS) Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: ...